Introduction
Lumbar discectomy is a surgical procedure to remove part of a
problem disc in the low back. The discs are the pads that separate the
vertebrae. This procedure is commonly used when a herniated, or ruptured, disc in the low back is putting pressure on a nerve root.
This guide will help you understand
- what surgeons hope to achieve
- what happens during surgery
- what to expect as you recover
Anatomy
What parts of the spine and low back are involved?
Surgeons perform lumbar discectomy surgery through an incision in the low back. This area is known as the posterior region of the low back. The main structure involved is the intervertebral disc, which acts as a cushion between each pair of vertebrae. The two main parts of the disc are the annulus and the nucleus. The lamina
bone forms the protective covering over the back of the spinal cord.
During surgery, this section of bone is removed over the problem disc.
The surgeon also checks the spinal nerves where they travel from the
spinal canal through the neural foramina. The neural foramina
are small openings on each side of the vertebra. Nerves that leave the
spine go through the foramina, one on the left and one on the right.
Related Document: A Patient's Guide to Lumbar Spine Anatomy
Rationale
What do surgeons hope to achieve?
Lumbar discectomy can alleviate symptoms from a herniated disc in
the low back. The main goal of discectomy surgery is to remove the part
of the disc that is putting pressure on a spinal nerve root. Taking out
the injured portion of the disc also reduces chances that the disc will
herniate again.
These goals can be achieved using a traditional procedure, called laminotomy and discectomy, or with a newer method called microdiscectomy. The traditional method requires a larger incision and tends to require a longer time to heal.
Microdiscectomy is becoming the standard surgery for lumbar disc
herniation. Since the surgeon performs the operation with a surgical
microscope, he or she needs to make only a very small incision in the
low back. Categorized as minimally invasive surgery, this
surgery is thought to be less taxing on patients. Advocates also
believe that this type of surgery is easier to perform, prevents
scarring around the nerves and joints, and helps patients recover more
quickly.
Related Document: A Patient's Guide to Lumbar Disc Herniation
Preparations
How will I prepare for surgery?
The decision to proceed with surgery must be made jointly by you and
your surgeon. You should understand as much about the procedure as
possible. If you have concerns or questions, you should talk to your
surgeon.
Once you decide on surgery, your surgeon may suggest a complete
physical examination by your regular doctor. This exam helps ensure
that you are in the best possible condition to undergo the operation.
On the day of your surgery, you will probably be admitted to the
hospital early in the morning. You shouldn't eat or drink anything
after midnight the night before.
Surgical Procedure
What happens during the operation?
Patients are given a general anesthesia to put them to sleep
during most spine surgeries. As you sleep, your breathing may be
assisted with a ventilator. A ventilator is a device that controls and
monitors the flow of air to the lungs.
Some surgeons have begun using spinal anesthesia in place of
general anesthesia. Spinal anesthesia is injected in the low back into
the space around the spinal cord. This numbs the spine and lower limbs.
Patients are also given medicine to keep them sedated during the
procedure.
Discectomy surgery is usually done with the patient kneeling face
down in a special frame. The frame supports the patient so the abdomen
is relaxed and free of pressure. This position lessens blood loss
during surgery and gives the surgeon more room to work.
The two main discectomy procedures are
- laminotomy and discectomy
- microdiscectomy
Laminotomy and Discectomy
Laminotomy and discectomy is the traditional method of removing the disc. Laminotomy
is taking off part of the lamina bone (the back of the ring over the
spinal canal). This allows greater room for the surgeon to take out
part of the disc (discectomy).
An incision is made down the middle of the low back. After
separating the tissues to expose the bones along the low back, the
surgeon takes an X-ray to make sure that the procedure is being
performed on the correct disc. A cutting tool is used to remove a small
section of the lamina bone.
Next, the surgeon cuts a small opening in the ligamentum flavum,
the long ligament between the lamina and the spinal cord. This exposes
the nerves inside the spinal canal. The painful nerve root is gently
moved aside so the injured disc can be examined. A hole is cut in the
outside rim of the disc. Forceps are placed inside the hole in order to
clean out disc material within the disc. Then the surgeon carefully
looks inside and outside the disc space to locate and remove any
additional disc fragments.
Finally, the nerve root is checked for tension. If it doesn't move
freely, the surgeon may cut a larger opening in the neural foramen, the
nerve passage between the vertebrae.
Before closing and suturing the wound, some surgeons will implant a
special foam pad or a piece of fat over the nerve root to keep scar
tissue from growing onto the nerve. Some surgeons also insert a small
drain tube in the wound.
Microdiscectomy
The surgeon performs microdiscectomy using a surgical
microscope. A two-inch incision is made in the low back directly over
the problem disc. The skin and soft tissues are separated to expose the
bones along the back of the spine. An X-ray of the low back is taken to
ensure the surgeon works on the right disc.
A retractor is used to spread apart the lamina bones above and below
the disc. Then the surgeon makes a tiny slit in the ligamentum flavum,
exposing the spinal nerves. A special hook is placed under the spinal
nerve root. The hook is used to lift the nerve root, so the surgeon can
see the injured disc.
Next, the annulus (outer ring) of the disc is sliced open. Material from inside the disc is scooped out
to ensure the disc doesn't herniate again. Since only the injured
portion is removed, the disc is left intact and functioning. Then the
surgeon inspects the area around the nerve root and removes any loose
disc fragments. Finally, the nerve root is gently wiggled to make sure
it is free to move. If it can't move, the surgeon also cleans around
the neural foramen, the nerve passage between the two vertebrae. When
the nerve moves freely, the muscles and soft tissues are put back in
place, and the skin is stitched together.
Complications
What might go wrong?
As with all major surgical procedures, complications can occur. Some
of the most common complications following lumbar discectomy include
- problems with anesthesia
- thrombophlebitis
- infection
- nerve damage
- ongoing pain
This is not intended to be a complete list of possible complications.
Problems with Anesthesia
Problems can arise when the anesthesia given during surgery causes a
reaction with other drugs the patient is taking. In rare cases, a
patient may have problems with the anesthesia itself. In addition,
anesthesia can affect lung function because the lungs don't expand as
well while a person is under anesthesia. Be sure to discuss the risks
and your concerns with your anesthesiologist.
Thrombophlebitis (Blood Clots)
Thrombophlebitis, sometimes called deep venous thrombosis
(DVT), can occur after any operation. It occurs when the blood in the
large veins of the leg forms blood clots. This may cause the leg to
swell and become warm to the touch and painful. If the blood clots in
the veins break apart, they can travel to the lung, where they lodge in
the capillaries and cut off the blood supply to a portion of the lung.
This is called a pulmonary embolism. (Pulmonary means lung, and embolism
refers to a fragment of something traveling through the vascular
system.) Most surgeons take preventing DVT very seriously. There are
many ways to reduce the risk of DVT, but probably the most effective is
getting you moving as soon as possible. Two other commonly used
preventative measures include
- pressure stockings to keep the blood in the legs moving
- medications that thin the blood and prevent blood clots from forming
Infection
Infection following spine surgery is rare but can be a very serious
complication. Some infections may show up early, even before you leave
the hospital. Infections on the skin's surface usually go away with
antibiotics. Deeper infections that spread into the bones and soft
tissues of the spine are harder to treat. They may require additional
surgery to treat the infected portion of the spine.
Nerve Damage
Any surgery that is done near the spinal canal can potentially cause
injury to the spinal cord or spinal nerves. Injury can occur from
bumping or cutting the nerve tissue with a surgical instrument, from
swelling around the nerve, or from the formation of scar tissue.
An injury to the spinal cord or spinal nerves can cause muscle weakness
and a loss of sensation to the areas supplied by the nerve.
Ongoing Pain
Discectomy is especially helpful for patients whose main complaint
before surgery is leg pain. When back pain has been the main complaint,
however, surgical results vary. If the pain continues after surgery or
becomes unbearable, talk to your surgeon about treatments that can help
control your pain.
After Surgery
What happens after surgery?
Patients are usually able to get out of bed within a few hours after
surgery. However, you will be instructed to move your back only
carefully and comfortably. The drain tube is normally taken out the day
after surgery. Patients are able to return home when their medical
condition is stable.
Most patients leave the hospital the day after surgery. They are
usually safe to drive within a week or two. Bending and lifting should
be avoided for four to six weeks. People generally get back to light
work in two to four weeks and can do heavier work and sports within two
to three months. Workers whose jobs involve strenuous manual labor may
be counseled to consider a less strenuous job.
Patients usually begin outpatient physical therapy two to three weeks after the date of surgery.
Rehabilitation
What should I expect as I recover?
Many surgeons prescribe outpatient physical therapy within three
weeks after surgery. Physical therapy after lumbar discectomy is
generally only needed for six to eight weeks. You should expect full
recovery to take up to four months.
At first, therapy focuses on controlling pain and inflammation. Ice
and electrical stimulation treatments are commonly used to help with
these goals. Your therapist may also use massage and other hands-on
techniques to ease muscle spasm and pain.
Active treatments are added slowly. These include exercises for
improving heart and lung function. Walking and swimming are ideal
cardiovascular exercises after this type of surgery. Therapists also
teach specific exercises to help tone and control the muscles that
stabilize the low back.
Your therapist works with you on how to move and do activities. This form of treatment, called body mechanics,
helps you develop new movement habits. This training helps you keep
your back in safe positions as you go about your work and daily
activities. At first, this may be as simple as learning how to move
safely and easily in and out of bed, how to get dressed and undressed,
and how to do some of your routine activities. Then you learn how to
keep your back safe while you lift and carry items and as you begin to
do more strenuous activities.
As your condition improves, your therapist tailors your program to
help prepare you to go back to work. Some patients are not able to go
back to a previous job that requires strenuous tasks. However, your
therapist may suggest changes in job tasks that enable you to go back
to your previous job. Your therapist may also suggest alternate forms
of work. You'll learn to do your tasks in ways that keep your back safe
and free of extra strain.
Before your therapy sessions end, your therapist will teach you a number of ways to avoid future problems.
|